Using With A Headset - Icom VE-PG2 Instruction Manual

3
CONVERTER MODE APPLICATION

■ Using with a headset

When you turn ON the external headset switch*, the AF signal from the headset is
transmitted from transceiver 1 through the VE-PG2.
*Use the lock type lever switch.
• Transceiver 2 can communicate with other transceivers.
Other transceivers
Transceiver 2
Transceiver 1
[TRX1]
Extension number: 301
Password: c8d0zp6
Turn ON the transceivers' power,
and then set transceiver 1's
volume control to the 12 o'clock
position.
72
CAUTION:
To connect the transceivers or repeaters, use only the following cables:
OPC-2073 (For the transceivers) or OPC-2074 (For the repeaters).
Connect the specified cables to only [TRX1], [TRX2] or [TRX3].
Using another cable, like an Ethernet cable, may damage the VE-PG2,
transceivers or repeaters.
[TRX1]
VE-PG2
192.168.0.2
Connect to transceiver 1's speaker jack.
NOTE: First, connect the transceiver
to the VE-PG2 using the optional
OPC-2073. Then turn ON the power
to the transceiver and the VE-PG2.
Extension number: 302
Password: omp63yg
Switch
[SW]
[OUT]
IP router IP telephone
192.168.0.3 extension number: 201
(Operator B)
(Operator A)
External
headset
[IN]
To the [LAN] port
Connect to
unused ports
1 2 3 4 5
HUB