Icom VE-PG2 Instruction Manual page 268

6
CONVERTER MODE SETTING SCREEN
■ Connection setting
6-7 TRX/EXT Transceiver 1 (TRX1)–Transceiver 3 (TRX3)
ï Direct inward dialing setting (Continued)
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click on Transceiver port, TRX1, TRX2 or TRX3, shown on the list.
q
w
e
r
t
y
u
t Individual call specific number
When you set the "Control mode" to "IDAS," enter a prefix number of up to four char-
acters (0–9, *, #) to change the repeater to the individual call mode.
(Default: *1)
y Talkgroup call specific number
When you set the "Control mode" to "IDAS," enter a prefix number of up to four char-
acters (0–9, *, #) to change the repeater to the talkgroup call mode.
(Default: *2)
u Did number for emergency notice
When you set the "Control mode" to "IDAS," enter an emergency notice number of
up to 15 characters (0–9, *, #) for repeater use.
Even if someone is using the repeater, their communication is terminated when the
repeater receives your emergency notice number, then you can use the repeater.
(Default: *265535)
• When you send an emergency notice in the Individual call mode, first enter the Individual call
specific number (default: *1), then enter the remaining Individual ID number.
• When you send an emergency notice in the Talkgroup call mode, first enter the Talkgroup call
specific number (default: *2), then enter the remaining Talkgroup ID number.
268