Icom VE-PG2 Instruction Manual page 279

ï EXT voice terminal setting (Continued)
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click "EXT Output (EXT OUT)" shown on the list.
t
y
t Reply delay time
Set the delay time from when a DTMF signal is received by the VE-PG2, until it
sends a "begin" tone, or tones, to the external device that is connected to the [OUT]
port.
(Default:1.5 seconds)
Selectable from Disable, 0.5, 1, 1.5, 2 or 3.
• This item appears only when you select "Combined mode" in "EXT I/O port" in "Operating
mode."
y Restoration delay time
Set the delay time from when a DTMF signal is received by the VE-PG2, until it
sends an "end" tone, or tones, to the external device that is connected to the [OUT]
port.
(Default:1.5 seconds)
Selectable from Disable, 0.5, 1, 1.5, 2 or 3.
• This item appears only when you select "Combined mode" in "EXT I/O port" in "Operating
mode."
CONVERTER MODE SETTING SCREEN
6
1
2
3
4
5
6
7
8
9
10
11
279