Trx/Ext Ext Output (Ext Out) - Icom VE-PG2 Instruction Manual

6-9 TRX/EXT EXT output (EXT OUT)

ï EXT voice terminal setting
Set the external equipment signal's audio level and time of Fade-out/Fade-in that
comes from the [OUT] port, in this screen.
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click "EXT Output (EXT OUT)" shown on the list.
q
w
e
r
q Output gain (HW)
Set the audio volume level of the external device which is connected to the [OUT]
port.
(Default: Minimum)
You can select from Maximum, Standard or Minimum.
• Normal input level is follow. (0dBs=0.775Vrms)
Maximum : 0dBs
Standard : –20dBs
Minimum : –40dBs
w Output gain (CODEC)
Set the audio volume level of the external device which is connected to the [OUT]
port.
(Default: 0)
(Selectable range: –18 to +6 (dB), 1 dB steps)
• Output gain (CODEC) can be used only when the signal comes from the [LAN] and [TRX1]–
[TRX3] ports.
CONVERTER MODE SETTING SCREEN
6
1
2
3
4
5
6
7
8
9
10
11
277