Ip Network Connection Ext I/O (Ext) - Icom VE-PG2 Instruction Manual

6-5 IP network connection EXT I/O (EXT)

ï VoIP call destination setting
Set the IP network type to send calling signals from transceivers that are connected
to the [IN] and [OUT] ports, to the IP telephone.
Place the mouse pointer on "Connection setting," and then on "IP network connec-
tion," and then click "EXT I/O (EXT)" shown on the list.
Select either SIP server transmit or Peer to Peer call as the IP network type, and
enter either the phone number into "Phone number" or SIP URI into "SIP URI."
q SIP server transmit
The transceivers that are connected to the [IN] ports send the calling signal to the IP
router, and the IP router sends the signal to the IP telephone's phone number, which
is set in the VE-PG2's "Phone number."
w Peer to Peer call
The transceivers that are connected to the [IN] ports send the calling signal to the
SIP URI, which is set in the VE-PG2's "SIP URI."
Also, input your own SIP URI into the "Peer to Peer connection setting." (p. 50)
NOTE: Input the SIP URI in one of the following two ways:
sip: SIP user name@IP address (Example: A100@192.168.0.1)
sip: SIP user name@Host name.Domain name (Example: A100@ICOM.PG2)
• Input the SIP URI of up to 63 characters, and do not input a space.
• Use more than one alphabetical character for a SIP use name. (Example: A100)
CONVERTER MODE SETTING SCREEN
q
w
6
1
2
3
4
5
6
7
8
9
10
11
253