Ip Address Setting - Icom VE-PG2 Instruction Manual

4
BRIDGE MODE SETTING SCREEN
■ Network setting
4-13 LAN IP (Continued)
ï IP address Setting
Set the VE-PG2's LAN address.
Place the mouse pointer on "Network setting," and then click "LAN IP" shown on the
list.
q
w
e
r
t
q IP address
Set the VE-PG2's IP address when the VE-PG2 is connected to the operating
network.
(Default: 192.168.0.1)
w Subnet mask
Set the subnet mask when the VE-PG2 is connected to the operating network.
(Default: 255.255.255.0)
(Setting example: When you set the subnet mask to "255.255.255.248")
• IP address can be set between "192.168.0.0" and "192.168.0.7."
• IP address for network devices can be set between "192.168.0.2" and "192.168.0.6."
• The following IP address cannot be used for network devices.
192.168.0.0
192.168.0.1
192.168.0.7
e Default gateway
Set the default gateway when your VE-PG2 communicates with a network device
which has a different network part IP address.
r Primary DNS server
Set the address of the main DNS server.
t Secondary DNS server
Set the address of the secondary DNS server.
162
: Network address
: VE-PG2 IP address
: Broadcast IP address