Trx/Ext Ext Input (Ext In) - Icom VE-PG2 Instruction Manual

4
BRIDGE MODE SETTING SCREEN
■ Connection setting

4-8 TRX/EXT EXT Input (EXT IN)

ï EXT voice terminal setting
Set the external equipment signal's input connection port, input AF signal's the
available timing, etc that input from the [IN] port, in this screen.
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click "EXT Input (EXT IN)" shown on the list.
q
w
e
r
t
q Input connection port
Set the output port for the AF signal from the [IN] port.
(Default: IP network)
• EXT Output
• IP network
• Emergency notice
150
: Sends the AF signal to the [OUT] port.
[NOTE]
This item is not selectable if you set "Combined mode" option in "EXT
I/O port" on "Operating mode."
: Sends the AF signal to the [LAN] port.
[NOTE]
I f yo u s e t [ I P C o m mu n i c a t i o n – E X T I n p u t ( E X T I N ) ] o r [ I P
Communication–EXT I/O port (EXT)], the AF signal is sent to them at
the same time.
: Sends the AF signal to the device which is selected in "Emergency
notice."
• You must set "Emergency notice" to send the emergency notice (p. 159).
• The emergency communication has priority over normal communication.