Icom VE-PG2 Instruction Manual page 79

Step 7 Setting the external input voice terminal
Place the mouse pointer on "Connection setting," and then on "TRX/EXT," and then
click "EXT Input (EXT IN)" shown on the list.
Set the external input voice setting.
• " Input gain (HW) " selection may differ, depending on the connected external devices.
• Set the " Input gain (HW) " to " Maximum " or " Standard " when the output signal from the exter-
nal amplifier is too soft.
CONVERTER MODE APPLICATION
Click "Enable."
Click to select "Minimum"
option.
• Click [Save] after setting.
3
1
2
3
4
5
6
7
8
9
10
11
79