Numbering Plan - Icom VE-PG2 Instruction Manual

6
CONVERTER MODE SETTING SCREEN
■ Connection setting (Continued)

6-15 Numbering plan

ï Specific number setting
Set a DTMF code for each function.
Place the mouse pointer on "Connection setting," and then click "Numbering plan"
shown on the list.
q
w
e
r
q Specific number for OFF-hook sending:
Set the DTMF code for transmitting OFF-hook.
(Default: Blank)
• You can input up to a 4-digit DTMF code.
• 0–9, *, #, A, B, C and D are selectable.
w Specific number for OFF-hook replying:
Set the DTMF code for receiving OFF-hook.
The VE-PG2 replies when it is called by other VE-PG2.
(Default: #)
• You can input up to a 4-digit DTMF code.
• 0–9, *, #, A, B, C and D are selectable.
e ON-hook specific number:
Set the DTMF code for disconnecting the communication.
(Default: #)
• You can input up to a 4-digit DTMF code.
• 0–9, *, #, A, B, C and D are selectable.
r Number for real time sending:
Set the DTMF code for immediately transmitting the code.
(Default: #)
• None, *, #, A, B, C and D are selectable.
298