Emergency Notice - Icom VE-PG2 Instruction Manual

6-17 Emergency notice

ï Emergency notice setting
Set the emergency notice output ports in "Connection setting"–"Emergency
notice" or to the port which is set in "Connection setting"–"IP network connection"–

"Emergency notice."

Place the mouse pointer on "Connection setting," and then click "Emergency notice"
shown on the list.
q
w
e
q Transceiver 1 (TRX1) – Transceiver 3 (TRX3)
Sends the emergency notice to the selected port, [TRX1], [TRX2] or [TRX3].
(Default: o Transceiver 1 (TRX1))
(Default: o Transceiver 2 (TRX2))
(Default: o Transceiver 3 (TRX3))
w EXT Output
Sends the emergency notice to the [OUT] port.
(Default: o EXT Output)
This is not displayed when "Combined mode" is selected in "EXT I/O port mode
•
setting."
e Emergency notice equipment
Sends the emergency notice to the transceivers or other VE-PG2s that are con-
nected to the VE-PG2.
(Default: o Emergency notice equipment)
The device can be set at "VoIP call destination setting" in "IP Communication-
•
Emergency notice."
Only send the emergency notice when "Emergency" is set at "Input connection
•
port" in "TRX/EXT-EXT Input (EXT IN)."
CONVERTER MODE SETTING SCREEN
6
1
2
3
4
5
6
7
8
9
10
11
303