Trx/Ext Ext Input (Ext In) - Icom VE-PG2 Instruction Manual

3
VE-PG2 SETTING SCREEN
■ Connection setting (Bridge mode)
3-8 TRX/EXT EXT Input (EXT IN) (Continued)
ï EXT �������l ���������l ���������g
Set the details of the control signal that is received from the [SW] port of the
VE-PG2.
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click �EXT Input (EXT IN) �EXT Input (EXT IN)�� shown on the list.
q
w
e
r
t
q I��u�� ������
Set the switch ON/OFF action when signals are received from the [SW] port.
(Default:Momentary)
• Momentary : Turned ON when a signal is received from the [SW] port, and turned OFF when
no signal is input from it.
• One shot : The switch is continuously turned ON when a signal is received from the [SW]
port, and turned OFF when another signal is received from it.
w Ev����� ON ������
Set the switch time when the signal is received from
(Default:1)
Selectable from 0.1, 0.3, 0.5, 1, 1.5, 2 or 3.
e Ev����� OFF ������
Set the time to turn the switch OFF when you select �One shot�� as the �Input type.��
(Default: 1)
Selectable from 0.1, 0.3, 0.5, 1, 1.5, 2 or 3.
80
�Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then
[SW] port.
the
and then