View Refilling Cycles (Option); Rinse Water Manual Measuring; W E Reserve The Right To Change Execution And Construction - Meiko K-Tronic Service Manual

Service Instructions Dishwashing Machine Model K-Tronic
Datei: 2K_9628652_Serviceanleitung-MIKE_EN_2005-09-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
All min lev for heat
204
Demo mode
205
217 Running direction L>R
218 Maintenance cycle
220 Load setting param.
302 Offset tank temp
Pause time mix
303
Circulation time
304
Refill time
306
307 Filling monitoring
7.3.2

View refilling cycles (Option)

On selection, the number of cycles entered since the last associated reset appears.
7.3.3

Rinse water manual measuring

On selection during 1 minute the mains
valid from: 2005-09-01

W e reserve the right to change execution and construction!

PKSP must comply with the above
conditions on one occasion.
- Require all minimum queries (tank
level) to be a condition for heating the
tank.
sec. 0 : Normal operation
Other:
Demo mode with cycle time
At start fill/heat, min 1, min 2 and max
are simulated in turn in order to be
able to demonstrate the machine
without water (display..)
Only for visualization purposes
0: R -> L; 1: L -> R
Number of operating hours to
maintenance (in steps of 100);
Possibility
parameters
K During filling/heating or in 'ready for
operation' and operation (as long as
the WP is not running) the tank
temperature set value is increased by
this offset
Sek. Waiting time till start of the
recirculation pumps for mixing in
filling/heating or in 'ready for operation'
Precondition: MIN available, door
CLOSED, wash pump OFF)
0,1 Sek. Waiting time till start of the
recirculation pumps for mixing in
filling/heating or in 'ready for operation'
(Precondition:
Heating ON, door CLOSED, wash
pump OFF)
Sek. Tank filling extension after reaching of
all MIN.
(only if MIN value fallen below)
Min. Filling monitoring for reaching MIN
query or MAX query (per tank)
* PARAMETERISE
* PARAMETERISE
Refill. cycles since
Mo 10.03.06
* PARAMETERISE
Update: 2006-11-14 / S.5
of loading
Refilling cycles
13:45
Ident No.: 9627429
works
* 2
* 2
18
* 1
Page 18/30