Rinse Result Poor - Meiko K-Tronic Service Manual

Rinse result poor

Defective components!
Cause
Rinsing water quantity too low
Rinsing arms missing /
incorrectly installed
Rinsing nozzles missing
Rinsing nozzles set at wrong
angle
Rinsing nozzles blocked
Boost pump defective
Rinsing dosage device defective
Loose deposits on washed items!
Cause
Rinsing water quantity too low
Basket unsuitable
Incorrect sorting of dishes in
basket,
spray marks
Tank water too heavily polluted
Residues / marks on the dish-ware, unsatisfactory result after drying
Unsuitable rinse agent
Rinse agent quantity too low
Rinse temperature too low
1_2_Rinse result poor.doc
Remedy
Clean dirt trap
Insert / install rinsing arms correctly
Insert nozzles
Set rinsing nozzles at correct angle
Clean nozzles
Check pump, change if necessary
Check power supply, repair if necessary
Check function, change dosage hose or device if
necessary
Remedy
Increase rinsing water quantity
Use suitable inserts
See operating instructions
Filter system missing or damaged
Pre-clearing insufficient
Rinse agent must be suitable for the water quality and
the dish-ware/cutlery.
Ask your chemical supplier for advice
Adjust the rinse agent dosing.
See Operating Instructions
Check the boiler heating element. Replace if necessary.
Set the boiler temperature.
See the Operating Instructions
1.2
Update: 20.06.2006