Cleaning; Safety Instructions For Cleaning; Cleaning After Operation - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
ATTENTION!
ATTENTION!
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
In the case of appliances with:
•
automatic regeneration of water softeners
•
frost protection
•
integrated reverse osmosis equipment
•
automatic tank filling and heating of the wash-tank by means of a time switch
automatic operation may only be activated if the premises in which the appliance is
located is under regular surveillance by staff.
9

Cleaning

9.1

Safety instructions for cleaning

The tank heating elements may still be hot after the tank has been emptied. There is
therefore the danger of burns when the machine is cleaned manually.
Electrical components, switch cupboards and other electrical components may not be
sprayed with a water hose or high-pressure cleaner.
9.2

Cleaning after operation

It is recommended that you maintain the machine in good condition not only for reasons
of hygiene but also to keep your dish-washing machine in full working order and to be
able to recognise damage more easily. Observe the following points after operation.
Clean and check that the machine is in working order:
•
Tank cover screen
•
Side screen supports
•
Pump screen (suction side)
•
Spray protection curtains
•
Wash pipe jets
•
Wash tanks
•
Float switch
•
Rinse arm jets
Any cladding panels removed to undertake this work must be replaced in their original
position after completion of the work. Ensure that all the parts are correctly installed.
gültig ab: 2003-01
W e reserve the right to change execution and construction!
Ident-Nr.: 9619165
Update: 2004-05-07
21/38