Cleaning Instructions - Daily - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
9.3 Cleaning instructions – daily
Do not use a high pressure cleaner!!!
Switch off the machine.
Remove the wash
systems. spray protection curtains.
Clean the pump suction
sieve.
Remove the outlet Clean the outlet
screen.
When you have cleaned the machine, replace all the parts; check that you have replaced them all and that they
are in the correct position. Check that all wash arms are properly secured. Check that all wash arm end caps are
water-tight. Replace the outlet stand-pipes and curtains.
The machine, switch cabinets and other electrical components must NOT
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
Open the doors.
internal chamber. and
vertical door with a hose
Remove and clean the Remove the pump rinse
Open the little drain.
Spray the float valve
screen. housing of the water
level monitoring.
be sprayed with a hose or a high pressure cleaner.
gültig ab: 2003-01
W e reserve the right to change execution and construction!
Spray the machine's Remove the tank cover
the rear side of the
arms..
Remove the pump Clean the pump sieve.
suction sieve.
Clean the wash and rinse arms and their jets.
Use a nylon brush to clean the jets. Check that
the wash arms and end caps are complete
and water-tight
Update: 2004-05-07
Remove the screen
screens.
Open the outlet. Remove the pump
Spray the machine's
internal chamber.
Clean all the tank cover
Close the doors
Ident-Nr.: 9619165
supports.
suction sieve.
screens
22/38