Removing Cover Panels From Under The Wash Tank - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
When the appliance is finally positioned, you must ensure that all the cleats carry
approximately the same weight.
An uneven distribution of weight can cause individual cleats to break. You can check the
loading by means of the force needed to turn the cleats with a spanner.
IMPORTANT!
Horizontal adjustment of the machine by means of the
vertically adjustable feet (spanner/wrench size 27)
must be done with care to ensure that the weight of
the machine is evenly distributed on the cleats. This is
absolutely essential in order to avoid displacement or
stresses caused by loading on one side. These
stresses can cause, for example, the vertical doors to
jam or can prevent them from being water-tight when
closed
.
•
Please also read the chapter on "General safety instructions ".
5.3

Removing cover panels from under the wash tank

The appliance can be fitted with side-hinged
doors as an option.
In order to be able to remove the lower cover
panels in this model, you must lift the wash
tank doors in the closed position after
releasing the securing nuts.
The cover panel can be removed if you
move the door upwards (ideally ask a
second person to lift the door).
gültig ab: 2003-01
W e reserve the right to change execution and construction!
An open-ended 27 mm
spanner is needed to
adjust the cleats of the
Push the door upwards
Ident-Nr.: 9619165
Update: 2004-05-07
appliance.
13/38