Fresh Water Rinsing Does Not Rinse - Meiko K-Tronic Service Manual

Fresh water rinsing does not rinse

Cause
Rinsing nozzles blocked
Booster pump for the fresh water
air gap not running
No water supply from the
building
2_6_Fresh water rinsing does not rinse.doc
Remedy
Remove and clean rinsing nozzles, clean / remove lime
deposits from boiler, if necessary
Power switch has tripped
Motor contactor does not operate
Motor contactor not activated
No relay output on the I/O circuit board
(See section "Wash Pump Malfunctions")
Open the stop-cock
Clean the dirt filter
Check fresh water inlet pipe; if necessary re-lay it so it is
free from kinks
Check power supply / plugs (jacks).
2.6
Update: 27.04.2006