Meiko K-Tronic Service Manual page 14

Operating instructions dishwashing machine model K-Tronic
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
When all the fasteners on the transport packing have been removed, the appliance is
again lifted on both sides with the pallet truck.
All the large bearers running along the length of the appliance can now be easily
withdrawn.
The appliance is next lowered onto the floor and the pallet trucks removed. You must
take great care to ensure that the appliance is not jolted when it is lowered
otherwise the foot cleats could be damaged beyond repair.
Please also ensure that the cleats are extended uniformly so that one set of cleats is not
loaded more than the others. You can check the loading by means of the force needed to
turn the cleats with a spanner.
If it is necessary to move the appliance along a wall, the appliance can be pushed along
the wall on its cleats for a limited distance.
(Be careful of gratings in the floor and changes in height.).
The appliance can also be easily moved flush to the wall by leaving the small longitudinal
bearers under the appliance and moving the appliance backwards as shown in the
picture.
Position the pallet truck close to the frame.
gültig ab: 2003-01
W e reserve the right to change execution and construction!
An open-ended 27 mm spanner is
needed to adjust the cleats of the
appliance.
Ident-Nr.: 9619165
Update: 2004-05-07
Pus the small
longitudinal bearers
to the left and right
of the frame
11/38