Starch Deposits - Meiko K-Tronic Service Manual

Starch deposits

Cause
Conveyor speed too high
Incorrect sorting of dishes in
basket
Spray marks
Detergent unsuitable
Detergent concentration too low
Tank temperature too low
Hint:
Starch detection with iodine, see sheet 1.5.1
1_5_Starch deposits.doc
Remedy
Select lower conveyor speed
See operating instructions
Detergent must be suitable for starch removal
Ask chemicals supplier, if necessary
See sheet 1.3.1
Adjust detergent dosage
See operating instructions
Check tank heating, change if necessary
Adjust tank temperature
See operating instructions
1.5
Update: 19.04.2006