Maintenance Recommendation; Datei:2K_9626212_Betriebsanleitung-Mike_En_2005-12-01.Doc; W E Reserve The Right To Change Execution And Construction - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
16

Maintenance recommendation

Maintenance
VERY IMPORTANT:
Tip:
Exchange the wearing parts designated „V" from the spare parts list.
1. Basket conveyor
Check drive motor
Check drive motor for exterior damage
Check drive motor for quiet running
(
Check current consumption I
N
Check ventilation grid for cleanliness
Conveyor overload switch activation
Check the transport cradle guide blocks and the link block of the drive
plate for wear.
Check the conveyor overload switch by simulating an overload. Correct the
pre-tension on the spring if required.
Check that the conveyor cradle moves easily
2. Wash pumps
Check pump motor
Check motor for exterior damage
(
Check current consumption I
N
Check motor for quiet running (bearing damage)
Check ventilation grid for cleanliness
Check wash pump
Check sliding ring seal for watertightness (external visual check)
Replace sliding ring seal
Check pump impeller for damage
Check pump housing for damage
Check pump screen (suction side) (if present)
Check pump screen condition
Thoroughly clean inside of pump screen
Clean outside of pump screen

Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc

MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
Whenever any electrical components are disconnected and
reconnected, replaced or repaired, a safety test must be
conducted, at least on these components!!!
see wiring diagram)
see wiring diagram)
gültig ab: 2003-01

W e reserve the right to change execution and construction!

Service step
At least once
Cleaning works
quarterly
Daily
Ident-Nr.: 9619165
Update: 2004-05-07
At least once At least once
or twice a yearly
year
but
but
every
every 2000 h
1000 h
ca. alle 2 Jahre
alle ca. 3000 h
28/38