W E Reserve The Right To Change Execution And Construction - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
Maintenance
VERY IMPORTANT:
8. Drying
Fan
Check fan for exterior damage
(
Check current consumption I
N
Check fan for quiet running (bearing damage) (visual and noise check)
Check suction side grid for cleanliness
Damper register (steam or hot water)
Check damper register for cleanliness
Clean damper register with hot water
Check damper register for watertightness (heating medium)
Blowing box
Check fan system nozzles for damage
Function check
The suction side temperature must not exceed
Check internal drying chamber for cleanliness
Clean internal drying chamber with hot water (remove greases and oils)
see later
x1
9. Heat recovery
Exhaust fan
Check fan for exterior damage
(
Check current consumption I
N
Check fan for bearing noise (damage to bearing)
Check protection grid for cleanliness
Heat exchanger
Check heat exchanger for cleanliness
Clean heat exchanger with hot water
Check heat exchanger watertightness
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
Whenever any electrical components are disconnected and
reconnected, replaced or repaired, a safety test must be
conducted, at least on these components!!!
see wiring diagram)
°C.
x1
see wiring diagram)
gültig ab: 2003-01

W e reserve the right to change execution and construction!

Service step
At least once
Cleaning works
quarterly
Daily
Ident-Nr.: 9619165
Update: 2004-05-07
At least once At least once
or twice a yearly
year
but
but
every
every 2000 h
1000 h
33/38