Basic Safety Measures During Normal Operation - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
ATTENTION!
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174

7.1.1 Basic safety measures during normal operation

The installation may only be operated by trained and authorized persons who are familiar
with the operating instructions and who are capable of working in accordance with them!
Before switching the installation on, check and ensure that
• Only authorized persons are present in the installation's operating area
• Nobody will be injured when the installation starts
Before commissioning, each time
• Inspect the installation for any visible damage and ensure that it will only be operated
in a perfect condition!
Report any defects to the foreman immediately!
• Remove any materials or objects not required for the operation of the installation from
the installation's operating area!
• Check and ensure that all the safety equipment is operating perfectly!
7.1.2 Operation
Open the stop valve in the
water pipe.
Close the doors.
Press the start button to
start the dishwasher
gültig ab: 2003-01
W e reserve the right to change execution and construction!
Switch on the power supply
from the building.
The wash tanks can be
automatically filled and
heated by means of the
"Fill/Heat" button.
Once the wash tanks are filled and have been heated to
washing temperature, the machine is started with the
"Start" button. The conveyor and the wash pumps now
operate so that the washing process can begin. The
machine is normally equipped with rinse water
conservation; in other words the rinse process is not in
operation continuously.
All other functions, e.g. temperature monitoring or wash
tank water level checks are performed by the machine
control; thus no other manual operations or checks are
Ident-Nr.: 9619165
Update: 2004-05-07
Ensure that all wash pipes,
wash systems, rinse arms,
screens and filters, tank
covers, waste pipes, waste
screens and swing valves
on the inlet and waste pipes
are installed.
Ensure that all the parts are
correctly installed!
Ready for operation
Once the wash tanks are
filled and have been heated
to the washing temperature,
the display will show:
"Ready for operation"
needed.
19/38