Refilling Of Detergent; Refilling With Rinse Aid; Cleaning - Meiko EcoStar 430 F-MIKE Operating Instructions Manual

Operating instructions EcoStar 430 F-M
CAUTION!
CAUTION!
CAUTION!
Datei:1_EcoStar430F-MIKE_9702129_Betriebsanleitung_EN_2012-07.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Works/repairs which were not correctly executed and the use of unauthorised parts by
unqualified personnel endanger both operators and the appliance, and will invalidate
the warranty.

10.2 Refilling of detergent

There are two different types of detergent containers:
Incorporated container
The storage container is translucent white in colour and is located in the lower part of the
stationary dishwashing machine. The lid can be opened after the container has been re-
moved from its position.
Re-fill the container marked "detergent" if necessary.
External container
The container is located next to the appliance.
Check the filling level of the container and if necessary, replace it by a full one.
Only non-foaming alkali detergents (pH > 7) suitable for commercial dishwashers and
glass washers may be used.
Detergent dosing units must be checked to see if they are functioning properly if
there is reason to believe that they are malfunctioning. Carry out a visual inspection!

10.3 Refilling with rinse aid

There are two different types of rinse aid containers:
Incorporated container
The storage container is translucent blue in colour and is located in the lower part of the
stationary dishwashing machine. The lid can be opened after the container has been re-
moved from its position.
Re-fill the container marked "rinse-aid" if necessary.
External container
The container is located next to the appliance.
Check the level and, if necessary, replace the container by a full one.
Only non-foaming acid rinse aid (pH < 7) suitable for commercial dish/ and glasswash-
ers may be used.
Rinse aid dosing units must be checked to see if they are functioning properly if there is
reason to believe that they are malfunctioning. Carry out a visual inspection!

10.4 Cleaning

After the tank has been drained, proceed as follows:
Do not use a foaming detergent for dish-washing by hand for pre-cleaning close to the
dish-washer. Foam can cause malfunctions in the dish-washer and a poor wash.
Food residues sticking to the tank, tank heating element and sieves must be removed
with a brush.
Dismantle the wash arms and rinse them under running water.
Wash nozzles must be cleaned daily.
The cleanliness of final rinse nozzles must be checked weekly and if necessary clean
under running water.
The inserts for the final rinse nozzles must be inserted with the prongs facing the water
flow.
Update:
W e reserv e the right to change execution and construction!
9702129 17/38