Salt Deposits - Meiko K-Tronic Service Manual

Salt deposits

Cause
Salt content of water too high
Salt content too high in spite of
added partial/complete
demineralisation equipment
Salt content too high after
regeneration of water softener
Hint:
For salt content as measured by electrical conductivity, see sheet 1.7.1
1_7_Salt deposits.doc
Remedy
Water treatment is necessary if salt content is excessive.
The following measures can be taken depending on the
water quality, the items to be washed and the operator's
requirements:
1. Partial softening to remove carbonate hardness salts
2. Complete softening or reverse osmosis equipment for
the production of chemically pure water
Check if cartridge is exhausted. If necessary change for
a regenerated cartridge
Check operation of water softener.
Check water inlet pipe, and if necessary clean/change
filer and dosage regulator
1.7
Update: 18.04.2006