Check List After Cleaning - Meiko K-Tronic Service Manual

Operating instructions dishwashing machine model K-Tronic
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
9.4

Check list after cleaning

After cleaning the machine ensure that
all parts have been replaced correctly.
Check that the following parts are present and in the correct position:
• Side screen supports
• Tank cover screens
• Outlet stand-pipe
• Pump rinse pipes
• Curtains
• Check that the correct number of wash pipe end caps is present
• Pump suction side sieves
Close the outlet valve.
The dish-washer is now ready for the next shift.
Important !!!
Do not use a foaming detergent for dish-washing by hand for pre-cleaning
close to the dish-washer. Foam can cause malfunctions in the dish-washer
and a poor wash.
gültig ab: 2003-01
W e reserve the right to change execution and construction!
Do not use
a foaming detergent
for dish-washing
by hand for pre-cleaning
close to the dish-washer.
Foam can cause malfunctions
in the dish-washer
and a poor wash.
Ident-Nr.: 9619165
Update: 2004-05-07
23/38