Dishwasher Cannot Be Switched On - Meiko K-Tronic Service Manual

Dishwasher cannot be switched on

Cause
No mains supply
Control fuse set off
Data and power supply lines
loose or defective
(operating LED's do not light up)
Membrane key-pad does not
function or defective
Control defective
Eprom missing, loose or inserted
at an angle
Eprom defective
EEprom missing, loose or
inserted at an angle
Eeprom defective
Input/output circuit board wrongly
coded
2_1_Dishwasher cannot be switched on.doc
Remedy
Connect to mains
Switch on control fuse
Check plug connection, change if necessary
Check plugs/jacks
Change membrane key-pad
Check power supply (operating LED must light up),
change if necessary
Check input/output circuit board (operating LED must
light up), change if necessary,
Check CPU (operating LED must light up), change if
necessary
Check Eprom for correct insertion
(notch pointing outwards - illustration)
Change Eprom
Check EEprom for correct
insertion
Change EEprom
Code S100 DIP switch as in the
circuit diagram
2.1
Update: 27.06.2006