Meiko K-Tronic Service Manual page 13

Operating instructions dishwashing machine model K-Tronic
Datei:2K_9626212_Betriebsanleitung-MIKE_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: 0781/203-0, Fax: 0781/203-1174
Electric motors may project downwards from the underside of the appliance. Care must
always be taken not to damage these.
Severe damage to motor & frame
The forks of the pallet trucks are lowered when the desired position of the appliance is
reached (but must remain under the bearers). The machine is standing on the wooden
bearers of the packing. There is no load on the foot cleats.
All the screws and bolts of the packing are now removed.
e.g. Remove these and other screws and bolts.
Leave for the moment all the wooden bearers under the machine.
The following screw-drivers and sockets are needed.
Torx TX 20
These screw drivers and sockets are available in all tool shops.
A reversible electric drill with a lockable chuck is also necessary.
gültig ab: 2003-01
W e reserve the right to change execution and construction!
Torx TX 25
Ident-Nr.: 9619165
Update: 2004-05-07
10 mm socket
10/38