Maintenance; Basic Safety Measures During Normal Operation - Meiko K-tronic Operating Instructions Manual

Operating Instructions – Dishwashing machine model K-tronic
ATTENTION!
ATTENTION!
ACHTUNG!
ACHTUNG!
Datei:2K_9545483_Betriebsanleitung_EN_1992-01-01.doc
Änderungen in Ausführung und Konstruktion vorbehalten. / W e reserve the right to change execution and construction. / Nous nous reservons le droit de changer l´éxécution et la construction.
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121

20 Maintenance

Maintenance work may only be carried out when the dishwashing machine is shut down.
In addition, the dishwashing machine main power switch must be in the OFF position and
locked in this position.
Existing safety systems may not be removed!
Tip:
Exchange the wearing parts designated „V" from the spare parts list.
We recommend that you take out a maintenance contract with our manufacturer's agent
in order to ensure a long service life.

20.1 Basic safety measures during normal operation

Observe the maintenance periods prescribed in the operating instructions!
Observe the maintenance instructions given in these operating instructions for individual
components!
Before carrying out any maintenance or repair work, prohibit access to the operating area
to any unauthorized persons! Provide or display a sign drawing attention to the
maintenance or repair work!
Before carrying out any maintenance and repair work, switch off the electrical power at
the main electrical power switch and secure the switch with a padlock! The key for this
lock must be kept in the hands of the person carrying out the maintenance and repair
work! Failure to observe these precautions can result in severe physical injury or damage
to property.
Before carrying out any maintenance and repair work, ensure that all the parts of the
machine that may be touched have cooled down to room temperature!
Carefully dispose of any lubricating, cooling or cleaning products that could harm the
environment!
20.1.1 Before start-up into operation following maintenance or repair
work
Before starting operations following maintenance or repair work
• Check the tightness of any screws that have been loosened!
• Ensure that any removed filters, protective screens or accident prevention systems
have been re-installed!
Following the completion of maintenance or repair work and before the
dishwashing machine is put back into service, ensure that
• All materials, tools and other equipment necessary for performing maintenance and
repair work have been removed from the work area.
• Any fluids that may have escaped have been removed.
•
All the installation's safety systems are operating perfectly!
20.1.2 Observe the environmental protection regulations
Legal obligations relating to the avoidance of waste materials and to their
recycling/removal in accordance with applicable regulations must be observed!
In particular, during installation, repair and maintenance work, materials that could pollute
water such as:
• Grease and oils
• Hydraulic oils
• Coolants
• Cleaning fluids containing solvents
must not pollute the ground or run into the sewerage system! These materials must be
stored, shipped, collected and disposed of in suitable containers!
Update: 2012-02-14, S. 16
9545483 49/58