Epson Stylus Pro 9500 Service Manual page 26

EPSON Stylus Pro 9500
Table 1-18. LED Indicators
LED Status
• On • Ink end error state (LM), I/C wrong insertion.
Ink Out LM
• Flashing • Ink low state (LM)
(Red)
• On • Roll paper auto cutting is selected (The paper is
cut automatically each page.)
Paper Source • Flashing
(Auto Cut)
• Difference from the roll paper auto cutting
setting. It shows that cut sheet paper is set.
• On • Roll paper with the cutter off is selected.
Paper Type
• Flashing • Difference between the roll paper and cut sheet
(Cut Off) paper setting. It shows that cut sheet paper is
set.
• On • Shows that cut sheet paper is selected.
Paper Type
• Flashing • Difference between the roll paper and cut sheet
(Single Sheet)
paper setting. It shows that roll paper is set.
Product Description
Condition
Control Panel
Revision A
26