Conversion Kit - Epson Stylus Pro 9500 Service Manual

EPSON Stylus Pro 9500

4.2.4 Conversion Kit

4.2.4.1 Conversion Kit Component Parts
This kit is a kit which upgrades the Stylus Pro 9000 from a printer that uses
dye-based inks to one which uses pigment-based inks, and is configured from
the following parts.
Table 4-5. Conversion Kit Component Parts
Part Name
• Maintenance Kit: 1 Kit
• MC Thick Mat Paper roll 44" x 5 m
• Document Pack
• Damper Assembly
• O-rings
• Joint Screws M6
• Ink Cartridge Model No. Labels
• EPSON _COLOR FAST Label
• Manual Cutter Cut Position Label
• Ink Cartridges
• Transport Liquid S46 Cartridges
The parts code for the Conversion kit is different each market as following table
because the document pack is different each market.
Table 4-6. Conversion kit parts code
Market
ETT
ECC
Other
EAI, EIB,EIS, EFS, EDG,
NOTE: The document pack is not packed in the Conversion kit for EAI,
EIB, EIS, EFS, EDG in our manufactory. These subsidiaries must
pack your document pack for each pigment product in your
warehouse yourself before you use this conversion kit.
Disassembly & Assembly
Quantity
1 K
• it
• 1 Roll
• 1 Kit
• 6 pcs.
• 6 pcs.
• 6 screws
• 2 labels
• 1 label
• 1 label
• 6 cartridges
• 6 cartridges
Parts Code Document pack
1059326 packed
1059325 packed
1059327 packed
1058466 Not packed
Disassembly Flow
NOTE: A PC card or CD-ROM with the latest firmware written to it is not
packed with this kit, so when implementing the upgrade service, a
PC card or CD-ROM with the latest firmware written to it should be
brought together with this kit.
NOTE: This kit does not include a CPS Soft Ripper or Postscript Server
system disc, so a system disk or materials which are compatible
with the customer's use environment should be brought together
with this kit.
4.2.4.2 Required Adjustment Item
In the upgrade service, if the necessary parts are assembled, the necessary
adjustment items are as shown below.
Table 4-7. Adjustment Items
No
1 Paper guide L installation position adjustment
2 Cutter mounting position adjustment
3 CR cover height adjustment
4 Paper cutting position adjustment
5 Bi-d Adjustment
6 Head GAP adjustment
7 P-EDGE / FRONT / REAR sensor adjustment
Revision A
Adjustment Items
122