Epson Stylus Pro 9500 Service Manual page 188

EPSON Stylus Pro 9500
COUNTER CLEAR
This function resets (to the original condition) the following counters which are
stored in memory on the Main Board.
Table 5-9. Counters Reset by "Counter Clear"
Counter
Protection Counter A/B
Ink Volume Counter Rb/ Ry/ Rx Rz
Consumed Ink Counter Cb/ Cy/ Cm/ Cc/ Cml/ Ccl
Power Cutoff Timer T2
Accumulated Prints Timer
CL Timer
CL Timer 3
CL Flag
Initial Charge Flag
Periodic Pseudo-Vacuum Flag
Note *: "1" means the flag is set, and the next time power is turned on the printer will
perform an initial ink charge.
Since the counter for the remaining ink holding
capacity of the waste ink pads and the ink
consumption counter, etc. are cleared by this
function, if the counters have been cleared, all the
affected parts (waste ink pads, ink cartridges) should
be replaced with new ones.
Adjustment
Reset Value
0
0
0
0
0
0
0
0
1*
0
Adjustment Steps
Revision A
188