Epson Stylus Pro 9500 Service Manual page 117

EPSON Stylus Pro 9500
DISASSEMBLING THE I/H ASSEMBLY
1. Take out the 6 screws (CP(W2) M2 x 4), then remove the I/H assembly
from the side cover.
2. Rotate the internal cartridge holder assembly until the lock is released.
Next, take out the 2 screws (CP(W2) M3 x 6) holding the friction gear
assembly and remove the friction gear assembly.
Figure 4-59. Removing the side cover of I/H assembly
Disassembly & Assembly
Figure 4-60. Removing the friction gear assembly.
Disassembly Flow
Revision A
Friction gear assembly
Remove
117