Epson Stylus Pro 9500 Service Manual page 196

EPSON Stylus Pro 9500
ENCODER
This function confirms the operation of the CR Motor and PF Motor encoders.
To check, with the affected sensor in the selected state, you can move the
following parts manually and confirm that the sensor's detection state (encoder
output conversion value) is displayed.
o
CR encoder: Move the carriage left and right by hand
o
PF encoder: Turn the Grid Roller by hand
[Pause] returns you
to previous menu
[SelecType]
Encoder: CR
Encoder: PF
[Item]
FAN
This function confirms the operation of the paper vacuum fans. When this item
is selected, the fan turns on. Press the Pause button to turn the fan off and
proceed to the next item.
[Pause] returns you
to previous menu
Adjustment
XXXX
XXXX
Fan: Pause
ELEC.
This function allows you to check the operation-record information and the
fatal-error record stored in the control circuit.
[Pause] returns you
to previous menu
[SelecType]
Record:Maintenance
[Item]
o Record: Error menu
The errors listed here do not include CPU errors (service call errors), and
the printer lists a maximum of the most recent seven fatal errors, Error 0~6.
Adjustment Steps
[Enter]
[Pause]
Record:Error
[Pause] returns you
to previous menu
[SelecType]
Error0: XXXXXXXX
Error1: XXXXXXXX
[Item]
Lists up to seven errors
Revision A
Other
menus
196