Epson Stylus Pro 9500 Service Manual page 231

EPSON Stylus Pro 9500
6. The couplings between the printer body and stand should be fastened
securely with bolts.
Figure 6-14. Body Assembly 7
Maintenance & Setup
7. Install the stand covers on the stand couplings.
8. After assembly is completed, release the casters and leveling screws on
the stand and install the printer in its designated location. (During
installation, the casters and leveling screws should be locked again.)
Unpacking and Installing
Figure 6-15. Body Assembly 8
Revision A
231