Epson Stylus Pro 9500 Service Manual page 13

EPSON Stylus Pro 9500
Printable area:See the following illustration and table for details.
Table 1-7. Printable Area
Heading Roll Paper
297 ~ 1118mm
PW (width)
(8.27 ~ 44.02")
720mm ~ 45m
PL (length)
(8.27~1771.65")
3mm/15mm*
LM (left margin)
(0.12~0.59")
TM (top) 3mm/15mm*
RM (right) 3mm/15mm*
BM (bottom) 3mm/15mm*
Note 1): The printer detects the paper width when the paper is set. (The paper width is not
detected when the paper width detection setting is Off.)
Note 2): Any image that exceeds the detected paper width, or the printable area specified by the
paper size setting, is not printed. (When paper detection setting is OFF, the printer may
print on the platen.)
Note 3): The size of the margin of roll paper can be changed from the panel as shown below.
Top and Bottom: 15 mm Left and Right: 3 mm, Top, Bottom, Left and Right: 3 mm,
Top, Bottom, Left and Right: 15 mm.
Product Description
Cut Sheets
LM
297 ~ 1118mm
(8.27 ~ 44.02")
420~1580mm
(16.54~62.2")
3mm
3mm
3mm
14mm
Paper
Feed
SPECIFICATIONS
PW
Printable Area
Figure 1-1. Printable Area
Revision A
RM
TM
PL
BM
13