Main Drive Assembly Removal - Lexmark W812 Service Manual
Hide thumbs
Also See for W812:
- User reference manual (197 pages) ,
- Setup manual (54 pages) ,
- Clearing paper jams (2 pages)
Table of Contents
Advertisement
4022-XXX
Main Drive Assembly Removal
1. Remove the fuser.
2. Remove the HVPS cover.
3. Remove the cable from P105 on the LVPS.
4. Remove the registration clutch cable from the clamp on the main drive assembly.
5. Remove the five screws which secure the main drive assembly to the frame.
6. While holding the main drive engagement lever (A) to a downward position (B), move
the main drive assembly left.
7. Disconnect the registration clutch cable from the registration clutch.
A
B
4-18
Service Manual
Advertisement
Table of Contents
