3.6. Setting the IP Address with DHCP
Function overview
When turning on this product with DIP switch 4 ON, a DHCP server on the network
can automatically set the IP address of the product.
3
To view the auto-set IP address, perform the following steps.
Procedure
1.
From a local console, log in to the product as the administrator user "admin",
and execute the network command without any parameters to display the
following IP address when DHCP is enabled.
login: admin
Password:
Last login: Fri Feb 24 14:28:34 2006 on console
$ network
<ip address> 192.168.0.169
<subnet mask> 255.255.255.0
<default gateway> 192.168.0.1
<DHCP = YES>
ip address 192.168.0.5
subnet mask 255.255.255.0
default gateway 192.168.0.1
$
For the above, the setting of 192.168.0.5 can be verified.
Note that the startup time is longer when DHCP is enabled.
SERVIS IP-Serial
38
1p Converter
User's Guide
1
2
3
4
5
indicates a switch.
Enter↵
Enter↵
Enter↵
6
7
8
On