Turn On/Off Ip-920E/Dc; Turn On Ip-920E/Dc; Turn Off Ip-920E/Dc - Fujitsu IP-920 E/DC Hardware User's Manual

3.1
3.1
This section explains how to power on/off the IP-920E/DC.

3.1.1 Turn on IP-920E/DC

When the power button on the front panel is set to the [ | ] position, the PWR LED turns on.
When IP-920E/DC completes preparations for operation, the RDY LED turns on.
12 - 24V 12 - 24V
Power button
This indicates the on switch, which is used to supply power to the IP-920E/DC.
｜
This indicates the off switch, which is used to disconnect power from the IP-920E/DC.
○

3.1.2 Turn off IP-920E/DC

When the power button on the front panel is set to the [O] position, this equipment is turned off
and the PWR LED turns off.

Turn ON/OFF IP-920E/DC

Power(PWR) LED
PWR ALM PWR ALM
RDY RDY IN IN
DWN DWN
FG FG
MNT MNT
Status(RDY) LED
10/100BASE 10/100BASE RS-232C RS-232C
E E
100M 100M
OPT OPT
LINK LINK
/ACT /ACT
43
Chapter 3 Operation Instructions
ANALOG AUDIO IN ANALOG AUDIO IN
IP-920E/DC