5.1.2.2 set ip address
Overview
Sets the IP address.
MAIN MENU → 2. network → 2. set ip address
Menu location
Command
None
When "s. save" is performed after setting this option, the
network command is executed and the setting is reflected.
Output
The IP address is being set to "192.168.0.169".
--- 2. NETWORK MENU -----
1. set host name
->LL-1
2. set ip address
->192.168.0.101
3. set subnet mask
->255.255.255.0
4. set default gateway
->192.168.0.1
5. set snmp [ON]
s. save
0. return to MAIN MENU
--------------------------
select > 2
Enter
<set ip address>
change [192.168.0.101] to : 192.168.0.169
--- 2. NETWORK MENU -----<changed, not saved>
1. set host name
->LL-1
2. set ip address
->192.168.0.169
3. set subnet mask
->255.255.255.0
4. set default gateway
->192.168.0.1
5. set snmp [ON]
s. save
0. return to MAIN MENU
--------------------------
select >
Notes
(1) After setting this option, save using "s. save". This setting will not be
enabled if it is not saved.
(2) If Enter is pressed in a blank space, the current IP address will be set.
Refer to
4.1.4 network Command (page 56)
Enter
SERVIS IP-Serial
1p Converter
User's Guide
5
103