Set Redirect - Fujitsu FX-3001SR User Manual

5.1.6.2 set redirect

Overview Connects (direct connection) or terminates the connection
between two specified serial ports.
MAIN MENU → 6. serial → 2. redirect
Menu location
Command redirect
Output
COM port connection is being set from OFF to ON (performed by a telnet
user on the network)
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [OFF]
3. set local console
4. set VT100
5. set port number
0. return to MAIN MENU
---------------------------
select > 2
Enter
set Redirect [off -> on]
select [com, ip] :com
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [ON]
3. set local console
4. set VT100
5. set port number
0. return to MAIN MENU
---------------------------
select >
Direct connection is being set from ON to OFF (performed by a telnet user on
the network)
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [ON]
3. set local console
4. set VT100
5. set port number
0. return to MAIN MENU
---------------------------
select > 2
Enter
set Redirect [on -> off]
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [OFF]
3. set local console
4. set VT100
5. set port number
0. return to MAIN MENU
---------------------------
select >
Refer to 4.1.20 redirect Command (page 74)
Enter
SERVIS IP-Serial
139
1p Converter
User's Guide
5