Setting The Ip Address - Fujitsu FX-3001SR User Manual

2.7. Setting the IP Address

Part of the initial configuration requires that the IP address of the product be set.
The IP address is set by executing the network command in the shell console.
network command
Syntax network <ipaddress> <subnetmask> <gateway>
Refer to 4.1.4 network Command (page56)
The following explanation uses the settings below as an example:
IP address:
Subnet mask:
Default gateway:
1. Execute the network command in the shell console.
$ network 192.168.0.50 255.255.255.0 192.168.0.1
2. In order for the setting to take effect, use the reboot command to restart the
product.
4.1.2 reboot Command (page 54)
Refer to
$ reboot
Enter↵
administrator password:
Shutdown NOW!
$ Wed May 17 18:48:33 GMT 2006
syncing disks... done
rebooting...
checking system memories...
................................RAM ok
................................ROM ok
...now system loading...
.
...........................done!
SERVIS IP-Serial 1p Converter/CF (FX-3001SRF)
Copyright (c) 2005-2006 FUJITSU COMPONENT LIMITED
Version 1.00 Build 387
Checking system hardware...
.
Real time clock
..................
Network controller : ok
...............
Compact Flash slot : 122MB media detected.
6:49PM on Wednesday, 17 May 2006
login:
The network settings take effect after rebooting.
192.168.0.50
255.255.255.0
192.168.0.1
Enter↵
: ok
Enter
SERVIS IP-Serial
1p Converter
User's Guide
2
21