Fujitsu FX-3001SR User Manual page 55

Encryption procedure
The following explanation uses an example scenario where the configuration files
under the /CF/conf directory are encrypted.
1. When encrypting, an encryption key must be set. Execute the changekey
command to create/modify the encryption key.
Refer to 4.1.34 changekey Command (page 92)
$ changekey -c
Enter
administrator password:
keycode:
Enter
$
2. Execute the encrypt command to perform the encryption.
Refer to 4.1.29 encrypt Command (page 85)
$ encrypt -c all
Enter
Do you encode all file? (y or n) y
encoded ntp.conf.
encoded portmng.cf.
encoded hosts.
encoded port.conf.
encoded ifconfig.sm0.
encoded users.
encoded rc.conf.
encoded passwd.
encoded master.passwd.
encoded group.
encoded services.
encoded snmpd.conf.
encoded localtime.
$
The configuration files under the /CF/conf directory are encrypted as shown below.
･ｮ｣ｨ･｡､･ｲ｣ｯ､･ｩｮｦ蛛・'・
・ B+=Hz ﾐﾕ・・3I{㌘ﾍ｡4 ｩ p ｬ !

^Zh=ｹ G 歯 Z<AVW ｲｵ\+;6 ㌘ v ｩ糧㌘ﾒ弃㌘@G ｺ・ﾋｦ・J 妓 B､E 典
Hiy 祀 0 ﾋ B>y ﾇﾍ q・
be
ﾊｲ_]u ｷ  T ｸ R 晟ｹﾁ 8・ﾗ彁=M ﾁ i 靦・TL ﾄｷ tC 逕ﾋ ・ﾟ 
ﾁ

~S
摧 蛹|ﾜ p 拊 4*ﾘ
 
U K|
俿 6l 吊{・ｾ b ﾋ   *室 6 ﾟ T ﾎﾈﾌｭ簗・
When configuration files are encrypted, the import command cannot be executed.
When configuration files are encrypted, executing the export command will prompt
whether or not to overwrite with unencrypted configuration files. Entering "Y"
performs the export.
Enter
Enter
 
o q＇O・捉{+ﾆｷ㌘信ﾗ & K
!`v ﾃ NE・ﾐｹﾘ a ｷｧ\]・V ﾐ e ﾋﾄｻ

停
-
・
 
8 V!・ｬ&Kh
V ｷ 8｣ V ㌘・
   
< "・ﾏ軽穽ﾒﾖ
X@i ﾔ㌘ L ﾍ・鱶贏㌘ﾅ㌘・㌘・

 di ｺ x・さ X ㌘｡a ﾘ^燧(8†夬ﾄ&K
AZk\
SERVIS IP-Serial
1p Converter
User's Guide
3
ﾆ
45