Fujitsu FX-3001SR User Manual page 187

(b) Target port, continuous testing
Local Console? [Y/N, N:Target Port] > N
continuous? [Y/N] > Y
connect Loop back cable. then hit any key
running [cont,1,140kB]
abort @ 1,167,858 byte
hit any key
(c) Specify the local console port and size
Local Console? [Y/N, N:Target Port] > Y
continuous? [Y/N] > N
How many size? (kB) [-1:100kB] > 300
connect Loop back cable.
connect terminal from Target Port for message output.
if ready, hit any key from Target Port
After connecting the loop back cable to the local console port, press any key on the
target port terminal. The message below will be displayed on the terminal.
running [100%]
complete!
connect console terminal. then hit any key on this terminal
After the test is finished, disconnect the loop back cable from the local console and
reconnect the terminal. Press any key on the target port terminal to start the test.
The UART test menu screen will be displayed on the local console screen.
UART test
---------------------
1: data compare test
2: bus integrity test
3: return
select >
(d) Local console port, continuous testing
Local Console? [Y/N, N:Target Port] > Y
continuous? [Y/N] > Y
connect Loop back cable.
connect terminal from Target Port for message output.
if ready, hit any key from Target Port
After connecting the loop back cable to the local console port, press any key on the
target port terminal to start the test. The message below will be displayed on the
terminal.
running [cont,1,323kB]
abort @ 1,355,177 byte
connect console terminal. then hit any key on this terminal
Enter
Enter
<- Updates the byte count display as needed
<- Aborts the test and displays the value when a key is hit
Enter
Enter
Enter
<- Updates the percentage display as needed
Enter
Enter
<- Updates the byte count display as needed
<- Aborts the test and displays the value when a key is hit
SERVIS IP-Serial
177
1p Converter
User's Guide
7