Userreject Command - Fujitsu FX-3001SR User Manual

4.1.16

userreject Command

Overview
Syntax
Parameter(s)
Password required?
Notes
(1) This command only sets a user to be blocked from logging in; it does
not force users to log out.
Example (from the local console)
Blocks "tester1" from logging in.
$ userreject tester1
administrator password:
user rejected.
$
Specifying a user that is already blocked from logging in releases the block.
$ userreject tester1
administrator password:
user un-rejected.
$
If a user name that was not registered is specified, the following is
displayed.
$ userreject user1
No such user `user1'
$
When a user that is blocked from logging in attempts to log in, the following
is displayed and the user is not logged in.
login: tester1
Password:
Last login: Thu Aug 4 09:20:28 2005 on console
Can not login.
Permission denied.
Blocks the specified user from logging in.
Specifying a user that is already blocked from logging in
and then executing the userreject command will release
the blocked user.
The status of the blocked user can be confirmed by the
userlist command.
userreject <username>
username = The user name to be blocked from logging
in.
Yes (* same as the administrator password)
Enter
Enter
Enter
Enter
Enter
Enter
Enter
SERVIS IP-Serial
69
1p Converter
User's Guide
4