Changekey Command - Fujitsu FX-3001SR User Manual

Advanced version only
4.1.34
Overview
Syntax
Parameter(s)
4
SERVIS IP-Serial
92
1p Converter
User's Guide

changekey Command

Changes the encryption key of the log files and/or
configuration files.
changekey <-l | -c>
-l = Changes the encryption key of log files.
-c = Changes the encryption key of configuration files.
Password required?
Example (from the local console)
Changes the encryption key for log files (the keycode is not displayed).
$ changekey -l
Enter
administrator password:
keycode:
Enter
$
Pressing the Enter key without entering a keycode displays the following
error.
$ changekey -l
Enter
administrator password:
keycode:
Enter
keycode error.
$
Yes (* same as the administrator password)
Enter
Enter