Table of Contents
Advertisement
3.8. SNMP Functions
Function overview
This product supports SNMP; therefore, snmpd can be turned on/off by executing
the snmp command.
Refer to
3
Custom settings can be used by importing the /CF/conf/snmpd.conf file modified
according to the environment and purpose of use.
In default setting all users are allowed to gain access via a read community called
"public".
Setting procedure (example)
The following explanation uses an example scenario when allowing access by a
network user using a read community called "public".
1.
Insert the CF card and press the CF/Init button to ready the CF card. Execute
the export command to export the current snmpd.conf settings to the /CF/conf
directory.
$ export
exported /CF/conf/ntp.conf.
exported /CF/conf/localtime.
exported /CF/conf/portmng.cf.
exported /CF/conf/hosts.
exported /CF/conf/port.conf.
exported /CF/conf/ifconfig.sm0.
exported /CF/conf/users.
exported /CF/conf/rc.conf.
exported /CF/conf/passwd.
exported /CF/conf/master.passwd.
exported /CF/conf/group.
exported /CF/conf/services.
exported /CF/conf/snmpd.conf.
$
2.
Eject the CF card, and edit the /CF/conf/snmpd.conf file.
* In FTP connection mode, you can "get" the above file and then "put" the edited file.
Refer to
SERVIS IP-Serial
40
1p Converter
User's Guide
4.1.7 snmp Command (page 60)
Refer to
4.1.32 export Command (page 89)
Enter
3.12 FTP/SFTP Connection (page 47)
Advertisement
Table of Contents
