Fujitsu FX-3001SR User Manual page 191

(1) Byte access
select > 1
Enter
Byte:Register Address [hexa](end: . or q) = Specifies the address to be
viewed/changed
Byte:Register Address [hexa](end: . or q) = 08000000 <- Enter 08000000
<- Displays the content of the address 08000000
08000000: 00/
Byte:Register Address [hexa](end: . or q) = 08000000
<- Enter 12 and press the Enter key to display the content of the next
08000000: 00/ 12
address
08000001: 00/ p
08000000: 12/ n
08000001: 00/ n
08000002: 00/ p
08000001: 00/ p
08000000: 12/ q
Byte:Register Address [hexa](end: . or q) =
Byte:Register Address [hexa](end: . or q) = 08000000
08000000: 12/ .
Byte:Register Address [hexa](end: . or q) = 08000000
08000000: 12/
Byte:Register Address [hexa](end: . or q) = 08000000
08000000: 12/ 13.
address
Byte:Register Address [hexa](end: . or q) =
Byte:Register Address [hexa](end: . or q) = 08000000
08000000: 13/
Byte:Register Address [hexa](end: . or q) = 08100000
<-Press the Enter key to display the content of the next address
08100000: 10/
08100001: 2F/
08100002: 11/
08100003: EE/
Error messages
When an invalid address is specified, "Illegal address" is displayed.
This is resolved using data from the self-diagnostic program and exception
handling is not performed.
Byte:Register Address [hexa](end: . or q) = 14000000
14000000: Illegal address
When a register address is specified that is not available for byte access, "Cannot
access" is displayed.
Byte:Register Address [hexa](end: . or q) = 00200000
00200000: Cannot access 8BIT data for this register
(2) Half Word access
This is the same as byte access except that it is processed in 16-bit units.
(3) Word access
This is the same as byte access except that it is processed in 32-bit units.
To change the content of the address 08000000, enter the
value and press the Enter key
<- Enter p to display the preceding content
<- Enter n to display the next content
<- Enter q to enter another address
<- Enter . to enter another address
<- Enter the value and . to change the content and then enter another
and press the Enter key
SERVIS IP-Serial
1p Converter
User's Guide
7
181