Table of Contents
Advertisement
Hotkey functions
Entering a hotkey combination causes, the terminal emulator to suspend
communication via target port and enables the execution of a terminal emulator
command.
Default hotkey setting: Ctrl + E, C
Terminal emulator commands
Terminal emulator commands are executed by entering one of the following
command keys after pressing a hotkey combination to suspend communication with
the target.
Pressing the Enter key after the command is completed restores the target
communication status.
The following is a list of command keys:
Command key
.
e
s
b
o
x
z
?
Changes to the hotkey settings are not saved. The next time the terminal
emulator is started, the default settings are restored.
When temporarily going to the shell from the terminal emulator with the
"z" command, execute the "fg" command from the shell prompt to return
to the terminal emulator.
Process
Exits the terminal emulator. Returns to the shell console.
Modifies hotkey setting (two alphanumeric chars).
Restores the default setting after exiting the terminal
emulator.
Modifies line count of the terminal (default: 24).
Sends break code to target device.
Redisplays the log file.
Displays port settings.
Temporarily goes to shell console.
To return to the terminal emulator from the shell console,
execute the "fg" command from the shell prompt.
Displays Help on terminal emulator commands.
SERVIS IP-Serial
31
1p Converter
User's Guide
3
Advertisement
Table of Contents
