Table of Contents
Advertisement
3.2. Terminal Emulator
Function overview
A terminal emulator is the user interface used to control a serial device connected to
the target port of this product.
The terminal emulator is launched by executing the terminal command from the
shell console.
Refer to
4.1.22 terminal Command (page 76)
The terminal emulator can be executed via a local console or network.
Also, when a general user logs in to the product, the terminal emulator starts
automatically.
Terminal emulator screen transition
Waiting for
command
input
Screen state
Target communication status: A state where data I/O with a connected
$ terminal port1
[launch Terminal-Emulator -- press `^Ec?' to help]
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
localhost.localdomain login:
Target
communication
status
Hotkey
Enter key
input
input
Command
input
device is enabled. The I/O content of the
target port is displayed.
Enter↵
Command
result output
status
Data output from the target device
SERVIS IP-Serial
1p Converter
User's Guide
3
29
Advertisement
Table of Contents
