Change Command - Fujitsu FX-3001SR User Manual

Advanced version only
4.1.33

change Command

Overview
Syntax
Parameter(s)
Password required?
Notes
(1) When the CF card is not mounted, an error is thrown.
(2) /CF is the root directory of the specified directory.
Example (from the local console)
Copies the configuration files under the "/CF/confset1" directory to the
/CF/conf directory.
$ change /confset1
administrator password:
change command is completed.
$
Copies a set of configuration files under a specified
directory path, which was prepared under the /CF
directory, to the /CF/conf directory.
This comes in handy when toggling between different
sets of settings.
change <directory path>
directory path = Specifies the directory under /CF to be
copied.
Yes (* same as the administrator password)
Enter
Enter
SERVIS IP-Serial
91
1p Converter
User's Guide
4